How to Build a Computer Desk from Scratch

The best way to save and make some money this period is definitely learning how to build a computer desk from the very scratch. Millions of Americans including myself sincerely don’t fully give in to hardware furniture that one would have to couple it by oneself.

This is an opportunity for you to learn so that you can find a way to earn. The fact, that you know it and capable to make one turns you to a hot cake in the marketplace.

Of course, you don’t have an excuse to be broke, especially this crucial time, save up the few bucks you’ve got by investing them. This information is free, all you just have to do is to discreetly follow the guides and understand it.

This article promises to journey with you from the spot that you are to the carpentry workshop close to you, marketplace and so on. So, let’s begin by systematically explaining each of the steps on how to perfectly construct a computer desk all by oneself.

Check out my 8 steps of getting the job done.

8 Things to Consider about How to Build a Computer Desk from Scratch:

1. Build Up a Solid Foundation

This is pure carpentry if you’d ask me. So, if you haven’t held the edge of a saw before, it’s better you sum up interest to it. Nevertheless, the coupling of desks from the scratch is somewhat of an interesting task.

One of the critical stages is marking out measurements. Of course, at this stage, you wouldn’t want to abstractly make your measurement but rather you would want to get a prototype of what you need.

In other words, as a first timer, it’s advisable that you get a computer desk model which you can measure and make a “copy” of it.

Furthermore, at this stage, what’s expected of you is to make a rough sketch of how you want your computer desk to look like. The features that you’d love to see and so on. Definitely, these steps will help you to make up a better planning.

2. Make Available the Construction Materials

Have you been to an American ace hardware shop before? If yes, then I guess you must be a savvy when it comes to making choices of wood sizes. Of course, you might even have been into one, but not a typical American shop. Let me introduce you to Americans method of making woodworks.

After you must have discreetly selected a pattern for your work, you would want to judiciously select the palatable screws that can perfectly join two pieces of wood together. In this case, the thickness of each of the pieces are factors that really must be considered.

Before this, it might interest you to know that the major considerable part to determine the thickness is the overlay top, footrest, and support beams. Therefore, take the measurement of their thickness to choose your screws.

Sizes of screws you can find in any American hardware or handcraft shop ranges from #2 to #10. Never be surprised when you hear “G by J”. This means that “G” is the breath and “J” is the length.

So, you might be asked what the dimension of your intended desk is. Now, let’s back up to the identification of screw sizes. The simple gist about it is that you select the size of your screw with respect to the “fatness” of the wood and sometimes the kind of wood.

Also, always mind choosing the length of screws on the basis of the thickness of the wood that you’re about using. This means for woods that are 1.25” thick, a screw that’s 2” should perfectly do the job.

Of course, anyone can intuitively select the shape of screws. The only problem might be that you don’t know the number of screws that would be enough, so what are you to do? Get extras!

3. Tools

  • You’ll need a power saw for manually cutting the delivered lumbers into sizes.
  • G-clamp will be great for the firm holding of the plank into place.
  • Power drill also will be needed for drilling points where the screws are meant to be fixed.
  • Of course, you don’t use drills without bits, so be rest assured that you’d need bits that are best for the screws you chose. You can ask carpenters on how to choose the best bit for your work.

4. Cutting into Precisions

It’s at this junction that lumbers are cut. They are cut and layout into countable and identifiable sections. As a beginner, I’d enjoin you to get your wood is cut in sawmills.

It will be fast and you can seek for some ideas on how you can couple it if in case you forgot the pattern of your layouts. In fact, they can even go ahead and furnish/smoothen the planks/lumbers into a nice look form.

5. Align the Sides

Now that you’ve cut them into their respective dimension, it’s time to begin the work.

  • First, find out the part of the leg that has holes and the side that doesn’t.
  • Once that’s done, pick up one of the planks that you presupposed to use as a beam.
  • Place it by the side to make a right angle triangle, then get your screw and drive it inside it.
  • Ensure that the two screws are used for each of the phases and each of them penetrates at least 1.5 inches of the leg.
  • Once that’s done, you can proceed by picking up another plank that you predetermined to use as the beam. Align it to that same leg you worked on.
  • While aligning it to the other phase, ensure that the tip of the attached plank is touching the tip of the one you’re about to do.
  • Once that’s done, drive the screws at the top and the nadir of the plank that you just attached, just as you did to the former.
  • It now looks like a “T” desk right? Of course.
  • Add the other legs (3), to form a rectangle. Do this intuitively. Moreover, just as we advised, use a computer desk as a pattern.

6. Addition of Keyboard Drawer

It’s time to fix your rails which will help your drawer to slide lucidly. Get them and take the measurement of the breadth with your tape rule if you’ve forgotten and measured the same unit on the rails. Then divide them into four equal parts.

Position one above the other on the breadth sides of the desk. Ensure that the two rails that will be positioned on each side of the desk are parallel to each other and the distance apart of both rails at each side corresponds.

Then, make sure you tightly hold them to the wood by tightening them with the screws. Afterward, make a rectangular wooden drawer with open top and end (the part that remains inside). Then, insert it into the midst of the rails.

7. Attach Footrests with Beams

The footrest is mostly positioned at the breadth of every desk so as to enhance the sturdiness of the desk. In other words, since we are not making use of glue, it’s essential we use footrest so as to keep it off from wobbling. On the other hand, the footrest and the support beam helps users to comfortably use the table for relaxation.

Just as you did when you screwed the beam to the upper part of the legs, Use two screws to attach each footrest to the side by screwing both the top and the bottom of the plank on each of the legs. The beam, on the other hand, now passes between both footrests. You will observe that it has become firm and rigid.

8. Overlay the Top

Of course, you planned for this before leaving for the hardware store. This is the large flat surface that covers the whole skeletal structure. They are mostly furnished and smooth.

So, get this and lay it on top of the desk. Make sure that it covers the four edges. Once you’ve done that, screw the plank to the edges and the sides using your power drill. Ensure that your work is neat and perfect.

Final Verdict

This is how to build a computer desk from scratch with ease. Follow these steps and you won’t miss it. The steps are well explained. It can perfectly be used by an individual that hasn’t been to a carpentry workshop before.

It’s concise and comprehensive. Although no dimension is listed, yet it can be used by using a dimension of a model Nevertheless, we hope that our amiable readers get the best information they crave for.